Rush MH 5 Profile, Руководство пользователя

Страница: 21 / 44

RUSH MH 5 Profile User Manual 21
Backlight
To adjust the backlight settings:
1. Select BACK LIGHT menu and press ENTER. The present mode will blink
on the display.
2. Use the DOWN and UP buttons to select the ON (LED on) or OFF (LED
off) mode.
3. Press ENTER to confirm your selection.
Setting focus for standalone shows
Focus during standalone shows can be set for each gobo wheel: wheel 1
(rotating gobos) and wheel 2 (static gobos).
To set the focus for
the rotating gobo wheel:
1. Select FOCUS ADJUST and press ENTER.
2. Use the DOWN and UP buttons to change the focus point from 0…255.
3. Press ENTER to confirm the selected focus point.
To set the focus for the static gobo wheel:
1. Select FOCUS 2 ADJUST and press ENTER to confirm.
2. Use the DOWN and UP buttons to change the focus point from 0…255.
3. Press ENTER to confirm the selected focus point.
Dimmer Calibration
You can use the dimmer calibration feature to set the maximum light output
level during standalone operation or to match output levels across multiple
fixtures.
To set dimmer calibration:
1. Power the fixture on (if matching multiple fixtures, aim them so that their
projections are side-by-side).
2. Select DIMMER CALIBRAT and press ENTER.
3. Using the DOWN and UP buttons, change the value from 50 …100 to
adjust the maximum light level.
4. Press ENTER to confirm the maximum light level.
Dimmer speed
Dimmer speed provides two options:
•
NO is the default setting. It sets the dimmer to exactly follow changes in
dimming level sent from the controller. This gives the fastest dimmer
response.