Rush MH 5 Profile, Руководство пользователя

Страница: 19 / 44

RUSH MH 5 Profile User Manual 19
To set up Master/Slave operation:
1. Check that fixtures are linked in a chain with a DMX data cable.
2. Set DMX STATE to MASTER/SLAVE on all fixtures and make sure that no
DMX signal is present on the data link. The first fixture on the link will
automatically act as master. All the other fixtures will act as slaves.
Fixtures’ MASTER and SLAVE LEDs light to indicate which mode they are
operating in.
3. On the slave fixtures, use the UP and DOWN buttons to select from:
•
SLAVE 1 – fixture receives synchronizing information and runs the
same show as the master fixture, or
•
SLAVE 2 – fixture receives synchronizing information and runs a show
that is in sync with the master fixture’s show but is not identical to it.
4. Press ENTER to confirm your selection.
5. Select a pre-programmed standalone show from Shows 1 – 4 on the
Master fixture as described above, or set the Master fixture to run a
sound-activated standalone show as described below.
Sound activation (music trig)
The fixture’s built-in sound activation microphone can be used to trigger scene
changes with a music beat or other sound source when a fixture is running a
standalone show.
To set a chain of fixtures in Master/Slave mode to sound activation, you only
need to set up the Master fixture. Slave fixtures will synchronize with the
Master fixture.
When sound activation is running, the SOUND status LED on the control panel
flashes in sync with the music beat.
To set sound activation:
1. Select SOUND STATE and press ENTER to confirm. The current setting
will blink in the display.
2. Use the DOWN and UP buttons to select ON (sound activation enabled) or
OFF (sound activation disabled).
3. Press ENTER to confirm your selection.
Sound activation microphone sensitivity
To adjust the sensitivity of the sound activation microphone:
1. Play some music at the normal volume for the venue.
2. Select SOUND SENSE and press ENTER to confirm. The current setting
will blink on the display.