Ruroc LITE, Инструкция по эксплуатации

Страница: 6 / 36

WARNING:
‘If the helmet is worn in the wrong position, it cannot provide you with full
protection and, in the case of an accident, can result in serious injury or even death.
When wearing the helmet, it should not move freely without moving your scalp along
with it. You can check this by holding the helmet firmly and trying to move your
head within the helmet. If the helmet moves freely choose the next smaller size.
Close the buckle and tighten the chin strap so that it feels snug under your chin. Move your
head to check that you are still able to breathe, talk and swallow normally. Adjust straps if
necessary. Do not wear the strap over the chin, nor use any additional chin cups or similar.
Before using the helmet do a final check by tilting the helmet backwards and forwards.
The helmet should remain firmly in place and cannot be taken off in any direction.
If the helmet can move freely, rotate or gives a loose fit, use the next size down.
WARNING:
If the helmet is worn in the wrong position, it cannot provide you with full
protection and, in the case of an accident, can result in serious injury or even death.
EYE PROTECTION
We recommend that you use this helmet with bespoke RUROC goggles. This goggles are seamlessly
integrated into the design of this helmet and give maximum performance if used together.
HELMET CARE / CLEANING / STORAGE
Clean your helmet inside and outside regularly with lukewarm mild soap/water and a soft cloth.
Do not use aggressive detergents or solvents or rough brush/cloth. Remove the padding from
the helmet and hand wash with lukewarm mild soap/water. Do not machine wash or tumble dry
the padding. Let all parts fully dry before assembly, use or storage.
WARNING:
Do not use solvents, detergents, thinner, petroleum based products (e.g. gasoline),
bleach, ammonia and other cleaning agents as they may damage the materials of the helmet.
The damage may not be visible to the user.
WARNING:
Do not remove or modify any components or parts. Do not make any modifications
to the chinstrap or the buckle. Do not make any modifications to the internal shape of the
helmet or on its external shell. Do not cut or drill any parts, nor fit any not certified accessory
to the helmet.
Do not expose the helmet to temperatures over 50°C (around 122°F), such as those it may
experience in direct sunlight or in a car. Heat may damage the internal absorption structure.
Damages may not be visible to the user. Store the helmet in a dry and dark place when not in use.