Ruris 5500RS, Руководство пользователя

Страница: 35 / 42

EN
7
Fig. 3
DO NOT throw residual oil on the ground or in water. With the containers in which
the oil and the residual oil were, proceed according to the laws in force regarding
environmental protection.
Refuelling
When refuelling, the maximum supply level of the tank (below the level of the plug hole)
must be taken into account.
Checking the clutch
With the engine switched off, the throttle lever in the STOP position (pulled back to the
maximum) and without depressing the clutch lever, pull the starter handle and check that
the milling cutters do not move. If this happens, gently release the clutch cable by
screwing in the cable adjusting screw until the milling cutters are no longer actuated and
then lock the adjusting screw with the locknut.
Supply hole
Mill cutter
spindle
Oil drain plug