Ruris 5500RS, Руководство пользователя

Страница: 37 / 42

EN
9
Transport wheel
Transport wheel (Fig.4) is used to facilitate the transport of the machine from one place
to another. Before starting work, place the wheel in the highest position.
Working depth
The foot for adjusting the digging depth (Fig.1) is used to control the depth at which you
work, it can be adjusted if you remove the nail and move the foot up or down. The higher
the foot position, the greater the digging depth. The height of the foot will depend on the
type of soil you will work on but also on the humidity conditions.
7. MAINTENANCE
If you use the machine in conditions other than those listed here, you risk injury. We
recommend you to ask your dealer to find out what maintenance you need to do.
1. Stop the engine and disconnect the spark plug before performing any maintenance.
2. Let the engine and exhaust system cool to avoid burns.
3. It is important to wear protective gloves when working with sharp edges.
4. Clean the milling cutters at least once a year, remove the milling cutters from the drive
shaft to grease the shaft with Vaseline, thus preventing the milling cutters from getting
stuck on the shaft due to corrosion.
5. Remove the fuel from the machine if you are not going to use it for more than 14 days.
6. It is recommended to check and adjust all threaded assemblies after each use.