Runtastic GPS Watch with Heart Rate Measurement, Руководство по эксплуатации

Страница: 20 / 74

20
requires a cold start. A cold start is one that may take a minute or
longer to connect to the full GPS signal.
On the other hand, a warm start that acquires the signal near the
last GPS position, may only take 10 seconds to acquire the full GPS
signal. In either case, when possible, it is recommended to start the
GPS out in an open area with an unobstructed view of a clear sky.
See SECTION 4.3 for instructions on how to start GPS
5 GPS Watch Modes
The watch has four function modes. Press the MODE button to
switch between modes.

Watch/Timer/Alarm- Displays date and time. Press View
button to display remaining battery life, timer, alarm clock, and
dual time that adds a second time zone.

GPS-Workout/Heart Rate - Use for workouts to see heart rate,
distance, speed, and more. Three customizable views
available in workout mode.

GPS-Navigation/Path/Waypoint – Use to follow previously
recorded paths, or to create a new path. Choose points
(waypoints) along the path then navigate back to them or back
to where you started. Follow the points on previously recorded
paths to follow the same route. This mode is helpful when
hiking.

Compass - Use when you need to know your bearings and
direction.