V1.0
RUNGU Electric Juggernaut LE User Manual
Copyright 2018 Standard Bearer Machines, LLC
14
25.
Use a 6mm Hex wrench to tighten the pedal.
26.
Install the right pedal and finger tighten the pedal clockwise
–
the right pedal is marked with an
“R” as shown below.
Caution: Do not force the threading of the pedal onto the crankset. Warranty does not cover
replacement cranks for stripped threads.
27.
Use a 6mm Hex wrench to tighten the pedal.
28.
Inflate the Fat Tires between 10 and 15 PSI (69 to 104 KPa).
NOTE: If you plan to ride in sand or on soft ground, experiment with lower pressures (around 5 PSI) to
optimize grip and rear motor power. Riding on sand with inflation pressure above 9 PSI has been
shown to result in rapid, pre-mature tire wear.
