V1.0
RUNGU Electric Juggernaut LE User Manual
Copyright 2018 Standard Bearer Machines, LLC
17
Battery Case Installation
1.
The battery case (with battery) is packaged separately from the frame inside the packing
carton. Remove it from its packaging.
Caution: the battery case weighs more than 15 lbs. (6.8 kg)
–
be careful not to drop the case as it may
bend the casing making battery replacement difficult or impossible without repair.
2.
Enable the Parking Brake on the Rungu to stop it from moving while you complete the next
steps. Replace the battery case into the controller case at an angle with the connector end
facing towards the top.
3.
Slide the battery case so that the tab at the back of the case slides into the controller case.
Caution: When placing the battery case in the controller case, be careful to insert the tab into
the controller case. Not inserting the tab into the controller case can result in the battery
failing to make contact and the battery case falling out of the controller case resulting in
damage to the battery case. Battery case damage is not covered by the warranty.
Battery Case
Tab
