V1.0
RUNGU Electric Juggernaut LE User Manual
Copyright 2018 Standard Bearer Machines, LLC
34
Using the Optional Front Suspension
The front suspension has two manual controls that can change ride and handling characteristics.
Looking from above astride the Rungu, the right-side knob controls the stiffness of the suspension. The
left side switch is used to disable/enable the suspension.
To stiffen or loosen the suspension, turn the right-side knob clockwise or counter-
clockwise respectively. All Rungus ship with the suspension at the loosest setting.
If you find that the front end dives too much, or that you are having difficulty
turning on soft ground (sand, snow), increase the stiffness of both forks by turning
the knob clockwise.
When activated, the optional front suspension for the Electric Juggernaut
smooths cornering on hard surfaces and improves control on soft sand. Under
some circumstances such as when the rear wheel drifts sideways in very soft
sand, the suspension may make it difficult to stay upright. Under these
circumstances, Rungu recommends disabling the front suspension by turning the switch from the Open
position to the Lock position.
Using the Parking Brake Switch
The front or rear hydraulic brake (or both) levers have a parking brake switch. To operate the switch,
hold in the brake lever in and flip the switch. The switch holds the brake lever in place, which holds the
rotor in place and prevents the Rungu from moving when parked. The parking brake is very useful when
parking on angle. REMEMBER to switch off the parking brake before riding.
NOTE: Riding with the parking brake engaged produces significant wear on the brake pads leading to a
decrease in brake pad life and stopping power. Warranty DOES NOT cover replacement brake pads.
