Runco Video Xtreme VX-40d Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 102

Runco Video Xtreme VX-40d Скачать руководство пользователя страница 42

42

TO DELETE MULTIPLE CHANNELS

, highlight any channel in the

Channel Setup

menu

and press Func to go to the

Channel Copy/Delete

submenu. Select “Delete Unlocked

Only” and press to delete all unlocked channels. Or select “Delete All Channels” to delete
all channels, even those that are locked. In either case, the current channel will remain but
will be redefined from projector defaults.

NOTE: For any deletion, a confirmation box appears to make sure that you really want to
delete. Select “Cancel” (default) if you don’t want to delete after all.

The basic setups that describe how and where a channel can be accessed are listed in
the

Channel Setup

menu. These channel setups can be edited at any time in the

Channel

Edit

submenu.

From the presentation level press Menu to display the main menu. To display the

Channel

Setup

menu, press 3 , or move the highlight to the

Channel Setup

option and press . The

Channel Setup

menu will appear.

To edit parameters shown in the

Channel Setup

menu, select the relevant channel and

press. The

Channel Edit

menu will appear similar to the sample shown in Figure 3.12.

If desired, review and/or edit the following channel setups in the Channel Edit menu:

•

CHANNEL NAME:

An alpha-numeric label can be defined and/or changed here.

Channel names can be up to 12 characters in length.

•

CHANNEL NUMBER:

A 2-digit channel number can be changed here.

NOTES:

1)

If you enter a channel number that already exists, a dialog message appears

indicating that this number is already in use – assign a different channel number.

2)

You

can define up to 50 channels.

•

INPUT:

1-8, corresponding to where on the projector’s input panel the source is

connected.

•

IN MENU:

If checked (default, except for automatically defined channels with unchanged

parameters), this defined channel will then appear in the list available when Channel key
is pressed. If unchecked, the channel must be accessed via Channel on the keypad or
via the Auto Source function.

NOTE: Onscreen display of the channel list is an option that must be set in the

Menu

Preferences

menu.

Figure 3.12. Channel Edit Menu (SAMPLE)

Editing a Channel Setup

➤

CHANNEL EDIT — STEP 1

CHANNEL EDIT — STEP 2

CHANNEL EDIT — STEP 3

Section 3: Operation

Section 3: Operation

«
...
40
41
42
43
44
...
»

Содержание Video Xtreme VX-40d







































































































Отзывы:

Нет отзывов