Runco Video Xtreme VX-40d Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 102

Runco Video Xtreme VX-40d Скачать руководство пользователя страница 34

34

Most of the controls for the projector are accessed from within the projector’s menu
system. There are several groups of related

functions

, with each group selectable from the

Main

menu as shown at right. Press Menu at any time to display this

Main

menu.

On the remote keypad, either enter the number corresponding to the function menu you
wish to access, such as 2 for the

Image Settings

menu, or use the keys on any keypad to

highlight the desired option, then press Enter. The corresponding function menu or pull-
down list of further options will then appear.

With  a  function  menu  displayed,  navigate  in  a  similar  manner—enter  a  menu  option
number for any numbered option, or use the keys to highlight the desired option, then
press  (Enter).  Extra  long  menus  have  a  scroll  bar  on  the  right—use  the  arrow  keys  to
access  the  remainder  of  the  menu.  Locked  items  or  items  that  do  not  pertain  to  the
current action or condition appear dimmed and cannot be selected.

NOTES:

1)

If there is no signal present, all source-dependent adjustments are disabled.

2)

After 15 minutes of inactivity, the projector leaves the menu system and returns to the

presentation.

3)

The

Status

menu is read-only.

When finished with a function menu, do one of the following:

• Press Exit to return to the previous screen
• Press Menu to leave the menu system and return to the presentation

If at any time you are uncertain what to do next, press Help to display summary information
about the current menu or highlighted option. Press Help again to exit. In addition, a line
of “hint” text is included at the bottom of some menus.

3.3 Navigating the

Menus

Help

➤

Section 3: Operation

Section 3: Operation

Figure 3.4 Entering the Menu System

«
...
32
33
34
35
36
...
»

Содержание Video Xtreme VX-40d







































































































Отзывы:

Нет отзывов