22
DVI Digital Video
➤
INPUT 3
and
INPUT 4
provide simultaneous connection of both a composite video
source (
INPUT 3
) and an S-Video source (
INPUT 4
), though typically these connections
would be made at the DHD Controller. See Figure 2.12.
Use the DVI-I connector at
INPUT 2
to connect either analog or digital video devices to
the projector. The DHD Controller can be input here as well; adjust the output setting of
the DHD Controller to DVI if use of this port is desired. Use a cable with DVI-I connectors
at both ends to connect devices that transmit digital and analog video signals such as
high-quality DVD players, satellite receiver and digital cable TVs.
NOTE:
1)
To ensure true digital output from devices that transmit digital signals, connect
to the DVI-I connector.
2)
DVI loop through is not available unless you have the optional
DVI Input Module
installed at
INPUT 5
or
INPUT 6
.
Contact Runco for available optional input modules.
Figure 2.12 Connecting Composite or S-Video sources
Composite and S-Video
➤
Optional Inputs
➤
Section 2: Installation and Setup
Section 2: Installation and Setup