Runco Signature Cinema SC-1, Руководство по эксплуатации для владельца

Страница: 28 / 126

Controls and Functions
16 Runco SC-1 Owner’s Operating Manual
PRE
L
IMINAR
Y
9. A s pect Ratio S election Button s
Use the red buttons to select an aspect ratio directly or to enter numeric characters,
as follows:
ANA (16:9) (3)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4X3 (4:3) (6)
Scales the input signal to fit 4:3 display mode in the center of the screen.
LETBOX (Letterbox) (9)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
V-WIDE (VirtualWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material.
S VC (CineWide-equipped projector s only)
Selects the Virtual Cinema aspect ratio, used for viewing 16:9 source material on a
2.35:1 screen.
10. S -VID 1 (4) / S -VID 2 (5) ( S -Video)
Press to select an S-Video input or to enter the numeric character “4” or “5.”
11. HD 1 (7) / HD 2 (8)
Press to select a HD (RGBHV or YPbPr component) input or to enter the numeric
character “7” or “8.”
12. HDMI 1 / HDMI 2 (0)
Press to select a Digital Video input. Press HDMI 2 to enter the numeric character
“0.”
13. Memory Pre s et Button s :
I S F NI G HT
Press to recall settings for the current input from the “ISF Night” memory preset.
I S F DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
CU S T 1
Press to recall settings for the current input from the “Custom 1” memory preset.
CU S T 2
Press to recall settings for the current input from the “Custom 2” memory preset.