Runco Crystal CX-42HD, Руководство по установке и эксплуатации

Страница: 45 / 84

Operation
Crystal Series LCD Installation/Operation Manual 31
PRE
L
IMINAR
Y
Main Menu The Main Menu is the starting point for accessing all Crystal Series LCD functions.
(The ISF Calibration menu is not accessible until you enter a passcode.)
Source From the Main Menu, select Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, HDMI 1 is the
active source.
Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press
ENTER . Select the appropriate aspect ratio for the type of
program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by an arrow (>) to its left; in this example,
16:9 is selected.
Runco CX-65HD
Source
Aspect Ratio
Picture Adjust
Audio
Timer
Setup
ISF Calibration
> HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component 1
Component 2
RGB
Video 1
Video 2
> 16:9
4:3
Letterbox
VirtualWide
The aspect ratio selection persists until you change it. (It is not
saved independently for each input.)
Note