Ruijie RG-S2900 Series, Руководство по установке

Страница: 18 / 27

Chapter 3 Product Installation Hardware Manual
3-4
Figure 3-3 Fastening the switch onto the rack
3.3.3
Mounting the Switch to the Wall
If the supplemented hangers of the switch has four installation holes, then this switch
supports the installation on walls, as shown in the following figure.
Figure 3-4
3.3.4 Mounting the Switch to the Desktop
In several cases, users do not have the 19-inch standard cabinets. In this case, the most
frequent method is to mount the switch to a clean workstation.
Step 1
Attach the four adhesive rubber pads provided in the carton onto the
indentations on the four corners at the bottom of the switch.
Step 2
Place the switch on the desktop flatly to ensure that the air around the switch
can flow freely. You can install handles on the switch.
In addition, on condition that the switch accessory contains hangers, the installation is
shown in the Figure3-5.