Hardware Installation and Reference Guide
Installing the Device
7
3 Installing the Device
Before installing the device, make sure you have carefully read the requirements described in Chapter 2.
3.1 Installation Flowchart
3.2 Before You Begin
Before you install the device, verify that all the parts in the parts list are there and make sure that:
The installation site meets temperature and humidity requirements.
The installation site is equipped with a proper power supply.
Network cables are in place.
3.3 Precautions
The device can be mounted on a wall and a pole (diameter: 35 mm to 89 mm). If the diameter of the pole is out of the
range, the hose clamp is customer-supplied. In this case, we strongly recommend you to use a hose clamp with thickness
of 2.5mm at least. Otherwise, the device could fall down and cause injuries. When multiple bridges are installed at close
range, in order to avoid interference between bridges, the horizontal distance between two bridges should be 2m and the
Check
Start
Choose a Site
Install a Bracket on a Wall
Install a Bracket on a Pole
Install Device
Connect Cables
End
Adjust Orientation
