Hardware Installation and Reference Guide Installing the Access Point
14
Disconnect the device before cleaning it.
Do not wipe the device with a damp cloth.
Do not wash the device with liquid.
Do not open the enclosure when the device is working.
Fasten the device tightly.
3.4
Installing the Access Point
Note
You are advised to install the device where you can get the optimal coverage.
In the indoor area, the signal coverage of the ceiling-mounted device is larger than that of the wall-
mounted device. Please choose the ceiling-mounting method first.
3.4.1
Ceiling Mounting
(1) Drill four 6.5 mm (0.26 in.) diameter holes in the ceiling, 53 mm (2.09 in.) apart. Tap wall anchors into the
holes, and drive screws through the mounting bracket into the anchors to secure the bracket.
Figure 3-2 Attaching the Mounting Bracket to the Ceiling
(2) Align the square feet on the rear of the AP with the mounting holes on the bracket.
