KT332N Cutting &engraving control system user manual V1.1
44
files, press the up and down keys to select a file, the file will be previewed, and the graphic will be
displayed in the upper right of the interface. After pressing [OK], the file will be previewed on the
main interface, and the current file dialog box will be closed. If you want to cancel the preview,
press [Esc].
Press the left and right keys to switch the activated area with a blue square between the file list
on the left and the item on the right, indicating that the list or item is activated. When the "red
selection box" stops on the item, press the up and down keys to select the item and press [OK] to
select the item.
Press [Esc] to return to the main interface.
The entries on the right and bottom are as follows:
Data check: Perform data check on the selected file. Ensure the data safety.
File parameters: goes to the child menu.
Work time check: The total processing time
Clear processed copies: Clear the number of the processed files
Copy to U disk: Copy selected files to U disk.
Delete file: delete the selected file.
U disk file: U disk operating menu.
Memory operation: go to the child menu of the flash memory operation
Read memory file: read the list of memory files
8.7.2 File parameters
Select the "File Parameter" in the interface above and press [OK], then the pop-up menu is as
shown below:
Figure 8.7.2
User can modify the file property. User can define the array attribute such as line number and
column number and the interval distance. Feeding para are included of the parameters for
feeding and cutting.
Press [Esc] to return to the previous menu.
8.7.3 Array parameters modification
Select the "Array Information" item in the interface above, and press [OK]. The pop-up menu is
as shown below: