Cutting machine AR 10
15
Also follow the safety instructions in chapter 1.1!
Notify and obtain permission from Rühle customer service
if welding or cutting work is required on the machine!
Wear cut protection gloves when working on the blades!
Reaching into the inside of the machine by opening the
side cover is strictly prohibited when performing
“Regular
care”
activities!
When working on the electrical equipment of the machine,
ensure that
•
this is only done by qualified personnel!
•
the machine is always disconnected from the power
supply!
When working on the hydraulic system of the machine,
ensure that
•
this is only done by qualified personnel!
•
it is always disconnected from the mains!
•
it is depressurised!
•
the system must be vented after changing the oil or
individual components!
Use of lubricants
–
hygiene area
•
None
Use of lubricants
–
others
•
Synthetic high-performance lubricant TEROSON VR 500 / PLASTI-
LUBE, based on super-refined mineral oils, free from metallic
soaps or fatty acids
➢
Chains, sprockets of cutting drive (inside)
➢
Shafts, gear wheels of control unit (inside)
•
Multi-purpose grease OKS 476 white, for food technology
NSF H1
Reg. No. 137619
➢
Coupling rod bearing (inside)
