Cutting machine AR 10
6
!!! The cleaning personnel must observe the work procedures from the
“Cleaning”
work instructions prepared by the supervisor.
!!! The maintenance personnel may only carry out work specified as
“Regular maintenance”
unless any other authorisation has been is-
sued in writing by the manufacturer of the machine. The maintenance
personnel must observe the work procedures from the
“Maintenance”
work instructions prepared by the supervisor.
Disconnect the power plug for maintenance work!
!!! Do not modify the machine.
!!! Only Rühle spare parts and accessories may be used.
!!! The operating instructions as well as all other technical documents
included must be supplied completely when reselling the machine.
1.2
Remaining risk of accidents
!!! All life cycles phases
Damaged knife elements must be replaced!
Cut protection gloves must be worn when working:
•
on the open knife protection box,
•
on the cut-off knife,
•
on the grid knives of the knife levels,
•
in the chamber , e.g. to remove product.
Reaching into the machine or the chamber during operation
is strictly prohibited!
Any manipulation and bypassing of the safety devices is
strictly prohibited!
Risk of slipping and falling due to spilled hydraulic oil!
Make sure the floor under and around the machine is free
from oil!
