RuggedCom WiN51 Series, Руководство пользователя и инструкция по установке

Страница: 14 / 61

WiN5200 Product Description | 14
Note
The 802.16e standards are subject to amendment, and Win-MaxTM product family design compliance
applies to a specific revision of the standard. The Win-MaxTM product family does not support mesh
communication (direct subscriber-to-subscriber).
2.3 Block Diagram
The CPE consists of the following modules:
1. Base-Band board – including the WiMAX 16e MIMO Base-Band SoC (running the 16e
MAC + PHY) plus the User Interface plus the analog front end that interface the RF
module.
2. Power Supply board– DC/DC power supply. Converts the 48VDC to the various voltages
that are feeding the Digital and the RF modules
3. RF board - Single transmit dual receive module that modulate the analog WiMAX signal
input from the Base-Band modem to the high frequency RF output. Several RF modules
exist - each supporting different frequency band.
4. Chassis
5. Antenna – Integrated dual polarization antenna to support the MIMO schemes