RuggedCom WiN51 Series, Руководство пользователя и инструкция по установке

Страница: 33 / 61

WiN5200 Installation Procedure | 33
4.3.2 Wall Mount
Rear View Front View
Figure 4-3: WiN5200 Wall Mount
Follow the steps listed below to install the WiN5200 on a wall
1. Select a mounting location on the wall
2. Place the wall mounting bracket on the wall and mark 4 holes (2 on the top and 2 on the
bottom)
3. Drill 4 holes (2 on the top and 2 on the bottom) for the fastening inserts
4. Insert fastening inserts type NC ¼ into the holes
5. Insert 4 flat washers and 4 spring washers and 4 screws type NS1/4 X ½ HEX (2 on the
top and 2 on the down) via the holes on the mounting bracket
6. Attach the wall mounting bracket at this location