WiN5200
Management | 51
6.4
SNMP Management
There are two MIB types available in the CPE:
•
the standard MIB II (RFC 1213)
•
the private MIB
Table 6-4 describes the CPE Managed Parameters.
Table 6-4: Subscriber Station Parameters
Parameter
Description
MIB Type
Remarks
Location site
+ Contact details
MIB II
Cell ID
Activity
(Connected/Disconnected),
Speed (10/100/1000), Duplex
(Full/Half), IP Address,
Private
Data Interface
Status
MIB II
Temperature
temperature inside the case
Private
Software Version
all Modules software’s versions Private
Uptime
on time from power up
Private
Number of
registered SU
Private
SU MAC
Addresses
Private
SU Type
Private
Radio Status
Transmit: On/Off
Frequency: configured radio
frequency
Configured BW/FFT
Transmit power
Private
TX Counter
Number of transmit packets
Private
RX Counter
Number of receive packets
Private
Содержание WiN51 Series
