manualshive.com logo in svg

RuggedCom RSG2488, Руководство пользователя

RuggedCom RSG2488 - надежный Ethernet коммутатор с 24 портами и возможностью управления. Скачайте бесплатное руководство пользователя с нашего сайта для полной информации о настройке и использовании этого устройства. Посетите наш сайт, чтобы скачать manualshive.com.

Поделиться
Скачать
background image

RUGGEDCOM RSG2488

User Guide

ii

Copyright 

©

 2013 RuggedCom Inc.

All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized

except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or

trademark registration.
This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be

photocopied, reproduced or translated to another language without the prior written consent of RuggedCom Inc.

Disclaimer Of Liability

RuggedCom has verified the contents of this manual against the hardware and/or software described. However, deviations between the

product and the documentation may exist.
RuggedCom shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the furnishing,

performance, or use of this material.
The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions. We

appreciate any suggested improvements. We reserve the right to make technical improvements without notice.

Registered Trademarks

RuggedServer™, RuggedWireless™, RuggedCom Discovery Protocol (RCDP)™, RuggedExplorer™, Enhanced Rapid Spanning Tree

Protocol (eRSTP)™, ROX™, Rugged Operating System On Linux™, RuggedBackbone™, CrossBow™ and eLAN™ are trademarks of

RuggedCom Inc. Rugged Operating System (ROS)® and RuggedSwitch® are registered trademarks of RuggedCom Inc.
Other designations in this manual might be trademarks whose use by third parties for their own purposes would infringe the rights of the

owner.

Contacting RuggedCom

Corporate Headquarters

US Headquarters

Europe Headquarters

RuggedCom Inc.

300 Applewood Crescent

Concord, Ontario

Canada, L4K 5C7

Toll-free: 1 888 264 0006

Tel: +1 905 856 5288

Fax: +1 905 856 1995

RuggedCom

1930 Harrison St., Suite 209

Hollywood, Florida

USA, 33020

Toll-free: 1 888 264 0006

Tel: +1 954 922 7938 ext. 103

Fax: +1 954 922 7984

RuggedCom

Unit 41, Aztec Centre,

Aztec West, Almondsbury, Bristol

United Kingdom, BS32 4TD

Tel: +44 1454 203 404

Fax: +44 1454 203 403

E-mail:

 

[email protected]

Web:

 

www.RuggedCom.com

Содержание RSG2488



































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RSG2488

Datavideo DAC-10 Quick Setup preview
DAC-10
Бренд: Datavideo Страницы: 2
Under Control 2918 Instructions For Use Manual preview
2918
Бренд: Under Control Страницы: 9
Edimax GS-1016 Datasheet preview
GS-1016
Бренд: Edimax Страницы: 2
ORVIBO ZigBee Mini Hub Faq preview
ZigBee Mini Hub
Бренд: ORVIBO Страницы: 3
WAGO ETHERNET Accessories 852 852-0111 Mounting, Installation And Handling Manual preview
ETHERNET Accessories 852 852-0111
Бренд: WAGO Страницы: 38
Hama 00047693 Operating Instructions preview
00047693
Бренд: Hama Страницы: 2
B&B Electronics EIR405-SFP-T User Manual preview
EIR405-SFP-T
Бренд: B&B Electronics Страницы: 22
Hirschmann OS20-001000T5T5TAFUHB User Manual preview
OS20-001000T5T5TAFUHB
Бренд: Hirschmann Страницы: 40
Nortel BayStack 400-2FX Specifications preview
BayStack 400-2FX
Бренд: Nortel Страницы: 8
ATEN CS-128A User Manual preview
CS-128A
Бренд: ATEN Страницы: 30
GE Cync Installation Manual preview
Cync
Бренд: GE Страницы: 21
GE SBM Instructions Manual preview
SBM
Бренд: GE Страницы: 18
GE GLX+Q 1 1COM 16A 2M AST IR User Manual preview
GLX+Q 1 1COM 16A 2M AST IR
Бренд: GE Страницы: 27
GE Masoneilan 496 Series Instruction Manual preview
Masoneilan 496 Series
Бренд: GE Страницы: 12
GE Multilin UR-2S Quick Start Manual preview
Multilin UR-2S
Бренд: GE Страницы: 58
GE HO97916 Instruction Manual preview
HO97916
Бренд: GE Страницы: 19
GE DS-242-POE Installation Sheet preview
DS-242-POE
Бренд: GE Страницы: 10
GE C-Start Installation Manual preview
C-Start
Бренд: GE Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды