Rugged CCTV Workhorse 120-8, Инструкция по эксплуатации и руководство пользователя

Страница: 88 / 145

87
On the
{Data Setup} -> {Data 1~4} -> {Generate Alarm} -> {Spot}
menu, select the desired
channel using the
arrow (
STW X
)
buttons and press the
[Select]
button.
To set all channels at the same time, select
{Spot
} and press the
[Select]
button.
On the selection box, set the event type and turn it ON or OFF using the
arrow (
ST
)
buttons
and
[Select]
button.
D) Relay
Runs the alarm device connected to the DIO board in case of an alarm or an event
„
Relay setting
On the
{Data Setup} -> {Data 1~4} -> {Generate Alarm} -> {Relay}
menu, select the desired
channel using the
arrow (
STW X
)
buttons and press the
[Select]
button.
To set all channels at the same time, select
{Relay}
and press the
[Select]
button.