Rugged CCTV Workhorse 120-8, Инструкция по эксплуатации и руководство пользователя

Страница: 110 / 145

109
button.
On the input window, enter the minimum space using the
arrow (
STW X
)
and
[Select]
buttons.
Only numbers between 10 and 100 are recognized; each number denotes the space in GB
(gigabyte).
If the minimum space is more than 100 gigabytes, the following warning message is displayed:
(10) Overwrite
Turns NAS overwriting ON/OFF
On the
{Storage Device}
menu, select
{NAS Backup}->{9. Overwrite}
using the
arrow (
ST
)
buttons and press the
[Select]
button.
On the selection box, select ON or OFF using the
arrow (
ST
)
buttons or
[Select]
button.
5-6-6 NTP
Protocol for synchronizing the time between devices connected through the network
Description of features
1. Time synchronization
1) Synchronization with the NTP server
Time is synchronized with the NTP server by the hour.
A. Automatic setting
Connection with the server nearest to the user-defined zone is attempted or the next nearest
server if connection fails.
B. User setting
The user sets the URL or IP of the NTP server. If connection is not established, a message is
sent to the user, and the corresponding log, saved.
If synchronization with the NTP server fails, synchronization with the RTC ensues.
2) Synchronization with the DVR time server
The DTS server runs in Workhorse 120-8; time is synchronized every hour. Workhorse 120-8
DTS clients referring to the DTS synchronize the time of the DVR system.
Any change in the DTS time or a zone is reflected on the DVR belonging to the network
(synchronization signals are broadcasted without passing through the router or gateway; the
DVR time server does not support automatic connection).