Rugged CCTV Workhorse 120-8, Инструкция по эксплуатации и руководство пользователя

Страница: 35 / 145

34
Adjust the camera of the selected channel using the
arrow (
W X
)
buttons.
Go to the channel selection window using the
[ESC]
button and adjust the camera of the
channel video.
After adjusting the camera of the channel video, press the
[ESC]
button again.
The adjusted camera control is then saved immediately.
Moving the monitor up, down, right, or left excessively may cause a black or gray panel to
appear on the screen. A proper control range is achieved when there is no black or gray
panel on the screen.
4-5-5 TV Control
ƒ Use TV Control to adjust the images displayed on the CCTV monitor by moving the CCTV
monitor screen up, down, right, or left as shown below:
Press the
[Status]
button to shift to TV control mode as shown below:
Adjust the CCTV monitor screen using the
arrow
buttons as shown below:
After adjusting the video, press the
[ESC]
button.
The TV out adjustment is then saved immediately.
Moving the monitor up, down, right, or left excessively may cause a black or gray panel to appear on
the screen. A proper control range is achieved when there is no black or gray panel on the screen.
4-5-6 Language
ƒ The user can select the language for the On Screen Display (OSD) menu of the system.
To shift to language selection mode, press the
[Status]
button as shown below:
Press the
[Select]
button. On the language selection menu, select the language using the
arrow
( ST ) buttons and press the
[ESC]
button.