manualshive.com logo in svg

Ruff Cycles Ruffian, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Ruff Cycles Ruffian Скачать руководство пользователя страница 22

22

5.2.  BRAKE LEVER

You can adjust the brake lever position on the handlebar, along with the brake 
lever angle and lever width.

5.2.1.  ADJUSTING BRAKE LEVER POSITION

For a firm holding onto the handlebars when 
braking, take the brake lever by your index and 
middle finger.
To achieve this position, eventually move the 
lever sidewards, so that both fingers can grip 
the brake lever as shown in the picture.

You can move the brake grip on the handlebar, 
by loosening the hexagon socket screw on the handlebar clip. If required, first 
use an appropriate Allen wrench for the loosening and shifting of the Bosch 
operating unit or gear unit. 

Once you have found the correct position, tighten the grips just as much as to 
allow their rotation. 
In the next step, adjust the brake grip angle.

5.2.2.  BRAKE GRIP ANGLE

Adjust the brake grip angle so that with 
extended arm, you fingers rest on the brake 
levers when seated on the Pedelec. Your wrist 
should be stretched out as much as possible. 
After adjusting the angle, retighten the lever 
clamping bolt on the brake lever.

MAINTENANCE   

1

Содержание Ruffian









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды