Ruckus Wireless ZoneFlex 7762-T, Руководство по установке

Страница: 48 / 62

44
Attaching the Mounting Brackets
Step 1: Attach the Static Bracket to the Mounting Surface
Figure 35. Insert a wall anchor into each hole that you drilled, align the holes on the
bracket with the wall anchors, and the secure the bracket with the flat
washers and the hex nuts
9. Using a 10mm open-end wrench, tighten the nuts to secure the bracket to the
mounting surface. Screw torque value must be 0.4-0.5 Newton meter (Nm). As you
tighten the nuts, the metal cones that are built into the wall anchors will expand and
lock the wall anchors into place.
10. Continue to “Step 2: Attach the Dynamic Bracket to the Access Point” .
Wall anchor
Metal cone
Flat washer
Hex nut