Ruckus Wireless ICX 7650, Руководство по установке оборудования

Страница: 59 / 100

Ruckus ICX 7650 Switch Hardware Installation Guide 49
Part Number: 53-1005301-01
Monitoring the Device
LED patterns
DRAFT: BROCADE CONFIDENTIAL
ID Steady green The port number is same as the stack ID.
Or, the port number is the first digit of the PE ID.
No action required.
Steady amber The port number is the second digit of the PE ID. If the
port number is 10, then the second digit or PE ID is 0. No action required.
Alternating amber/green The port number indicates that the first and second
digit of the PE ID are the same. No action required.
PoE Off (no light) PoE is disabled. The port is not providing PoE power. No action required.
Steady green The port is providing PoE, PoE+, or PoH power. No action required.
Steady amber The PoE power is off due to a fault or not enough PoE
power budget set for the port. No action required.
TABLE 13 1/10 GbE SFP+ module port LEDs
LED state Status of hardware Recommended action
Off (no light) Not cabled. No action required.
Steady green Link is up in 10 GbE mode. No action required.
Blinking green There is 10 GbE traffic and packets are being transmitted or received. No action required.
Steady amber Link is up in 1 GbE mode. No action required.
Blinking amber There is 1 GbE traffic and packets are being transmitted or received. No action required.
TABLE 14 2x40 GbE module port LEDs (left-side LED)
LED state Status of hardware Recommended action
Off (no light) Not cabled. No action required.
Steady green Link is up in 40 GbE mode. No action required.
Blinking green There is 40 GbE traffic and packets are being transmitted or received. No action required.
TABLE 15 1x100 GbE mode 100 GbE module port LEDs
LED state Status of hardware Recommended action
Off (no light) Not cabled. No action required.
Steady amber Port link is up in 100 GbE mode. No action required.
Blinking amber There is 100 GbE traffic and packets are being transmitted or
received. No action required.
TABLE 16 4x10 GbE mode 100 GbE module port LEDs
LED state Status of hardware Recommended action
Off (no light) Not cabled. No action required.
Steady amber Port lane link is up in 10 GbE mode. No action required.
Blinking amber There is 10 GbE traffic and packets are being transmitted or received. No action required.
TABLE 12 100 GbE, 40 GbE, 10 GbE, 1 GbE, and 1/2.5/5/10 GbE Port LEDs (Continued)
Status mode LED state Status of hardware Recommended action