RTS BTR-80N, Руководство по эксплуатации

Страница: 55 / 90

BTR-80N, TR-80N, TR-82N Operation 53
Battery Installation
Ensure the On/Off volume control knob is turned off . Press
down and hold down the battery release latch, then slide the
battery pack about 1/8 inch back toward the latch until it stops.
Lift the battery pack out. Replace batteries as follows:
NOTE:
•
Start loading at the end of the case

where the strap is attached to the case.
•
Be sure strap goes under batteries.
1. Open the battery pack by inserting

fingernail and lifting
4. Tuck end of strap under door
when placing the battery cover
back on the case.
2. Pull battery strap to remove low

or dead batteries.
3. Load new batteries following the
polarity shown in the battery case.
WARNING:
Do not place an alkaline TR battery pack
in any battery charger. Severe charger
and battery pack damage may result.
FIGURE 71.
Battery Installation