POWER TOOL UNITS
RTM404
1-
Depth adjustment wheel
2-
Power Cord
3-
ON/OFF Switch
4-
Lever
5-
Trigger
6-
Pressure
7-
Nose
8-
Safety
9-
Magazine
10-
Fastener Window
TECNICAL DATA
RTM404
MOTOR 220 – 240 V 50Hz
MAGAZINE CAPACITY 100 STAPLES
LENGHT OF STAPLE 8 – 16 mm
LENGHT OF BRAD NAIL 15mm
FIRING SPEED 20 BRAD NAIL OR STAPLES PER MINUTE
SAFETY INSTRUCTIONS
1-
Keep your work area clean and well lit.
2-
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
3-
Keep bystanders, children, and visitors away while operating a poewr tool.
4-
Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or
modify the plug in anyway. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded.
5-
Doubled insulated tools are equipped with a polarized plug ( one blade is wider than
the other). This plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it stills does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug in anyway.
6-
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and
refrigerators.
7-
Do not expose power tools to rain or wet conditions.
