43
10. The disposal of any electronic products must be in accordance with local regulations (e.g. Directive
2002/96/EC of the European Parliament and of the Council on waste electrical and electronic
equipment). Some RTP Corporation products contain materials that may be detrimental to the
environment. These materials may include, but are not limited to lead (in solder) and lithium (in
batteries).
11. Prior to storage or shipping, the equipment must be packaged in accordance with the following
guidelines:
● Inventory all items and inspect all components for damage.
● Verify that all fasteners are properly tightened and that the chassis I/O module retaining bar is
properly installed.
● Wrap the chassis assembly in plastic bubble wrap.
● Select a suitable shipping box that provides at least 1½ inches of space between the equipment
and all sides of the box. This space shall be tightly packed with packing peanuts or bubble wrap to
protect the equipment during storage or shipping.
● Close and secure the box with suitable packing tape.
● Do not stack boxes more than three high. Store the boxes in a protected, dry environment. Do not
expose the boxes to rain or environmental conditions beyond the ranges specified for the
equipment in this document.
