Real Time Automation, Inc.
16
1-800-249-1612
Device Configuration
The device configuration area is where you assign the device description, IP address, and other network
parameters. Changes can only be made when the gateway is in Configuration Mode. Click the
Edit
button to make these changes.
Once you are done configuring the Description and the Network Settings, click the
Save Parameters
button.
If you are changing the IP Address of the gateway, the change will not take effect until the unit has been
rebooted. After reboot, you must enter the new IP Address into the URL.
It is recommended to leave the DNS Gateway set to 0.0.0.0 and the Ethernet Link as
Auto-Negotiate. If configuring the gateway to use E-mail, the DNS Gateway must be
set.
