Real Time Automation, Inc.
22
1-800-249-1612
Configuring Read and Write Scan Lines (cont.)
If you are configuring multiple devices click
<<
or
>>
to navigate to another device. If this is the only
device you are configuring, click the
Save Parameters
button.
Below is the Scan Line Data Limit for each Point Type and the max Length Range associated to them.
Note
: If the first address of the Modbus TCP/IP Server device starts at 0 (Register/Coil starting addresses
can be found in the Modbus TCP Server’s documentation), be sure to check the
Enable 0-Base
Addressing
box in the gateway to ensure proper communication. If improperly configured, expected
addressing may be off by +/- 1.
