RTA 460ESDFM-NNA1, Руководство пользователя

Страница: 68 / 74

Real Time Automation, Inc. 68 1-800-249-1612
Error Code Breakdown :
Format of Error: STS='Err Code', EXT_STS='Err Code' (N:'Slave Destination ID' A:'DF1 Request Address in
Offset Notation' L:'Number of points to Read')
1)
STS='Err Code', EXT_STS='Err Code' (N:'Slave Destination ID' A:'DF1 Request Address in Offset
Notation' L:'Number of points to Read/Write')
a)
Note: The Slave Destination ID will inform you of the device that had the error. The DF1 Request
Address and Length will inform you the specific scan line that had the error
2) Error Codes:
a)
Most common STS error ix 0x010: “Illegal command or format”
i) Potential issues:
ii) Selected Communication Command is not supported by the slave device
iii) File Type and File Number does not exist in the slave device
iv) File Offset does not exist in the Slave Device File Type and File Number
v) Attempting to read more data elements than exist in the slave device
3) N (Slave Destination ID):
a)
Slave Destination ID of the slave that the error was received from
4) A (DF1 Request Address):
a)
Starting address of the DF1 Request in Offset Notation that the error was received from
5) L (Length):
a)
Number of points of the request that the error was received from
Example:
This Error Code indicates STS 0x10, EXT_STS=0x00, “Illegal command or format”. Other details are:
•
N:55, from slave device with Destination ID of 55
•
A:ST155:44444; File Type of ST, File Number of 155, File Offset of 44444
•
L:1, the scan line with a single point was rejected
The Error Code indicates not valid , so check to see if there is a File Type of ST with File Number 155 set
up. Also make sure that the File Offset of 44444 is valid in ST155 for a length of 1.