RTA 460ESDFM-NNA1, Руководство пользователя

Страница: 67 / 74

Real Time Automation, Inc. 67 1-800-249-1612
7) Solid Red (Fatal Error) – The serial port selected on the DF1 Master Configuration page is not
configured.
a)
Verify that DF1 has an enabled port selected. If needed, configure port settings.
Variables - These are the values for All Slaves, or the specific slave selected.
1) Network Bitmap Status (Displayed in Hex):
a)
Each bit corresponds to a slave. If the bit is set, the slave is connected, otherwise the bit is 0.
b) Bit 0 corresponds to slave 1 and Bit 4 is for slave 5 and so on.
2) Read Requests:
a)
Number of DF1 Read Requests that the gateway has sent to the slave device.
3) Read Responses:
a)
Number of valid DF1 Read Responses that the gateway has received from the slave device.
b) Note: This should be equal to the number of Read Requests
4) Read Timeouts:
a)
Number of times the gateway has reached the timeout period waiting for a read response from
the slave device.
5) Read Errors:
a)
Number of DF1 Read Errors
6) Write Requests:
a)
Number of DF1 Write Requests that the gateway has sent to the slave device.
7) Write Responses:
a)
Number of valid DF1 Write Responses that the gateway has received from the slave device.
b) Note: This should be equal to the number of Write Requests
8) Write Timeouts:
a)
Number of times the gateway has reached the timeout period waiting for a Write Response
from the slave device.
9) Write Errors:
a)
Number of DF1 write errors
Status Strings - These are the values for All Slaves, or the specific slave selected.
1) Last Read Error Code:
a)
Last Read Request Error that the gateway received
2) Last Write Error Code:
a)
Last Write Request Error that the gateway received