RTA 460ESBS-N700, Руководство пользователя

Страница: 20 / 76

Real Time Automation, Inc. 20 1-800-249-1612
EtherNet/IP Adapter Data Group Configuration: Manual Mode
1) To transition from either of the two Auto-Configure Modes to Manual Configure Mode, click the
dropdown at the top of the EtherNet/IP Adapter Configuration page and select Manual
Configure.
a. When prompted, click OK to confirm mode change or Cancel to remain in Auto-
Configure Mode.
b. Once OK is clicked, there are two options for how to proceed.
i. To keep the data groups that are already configured, press OK .
c. You would want this option if you are adding additional data groups or you want to
modify the data group(s) that already exist.
ii. To delete the data groups that are already there and start over, press Cancel .
2) Enter the number of Input Data Groups and Output Data groups and click on the Generate Data
Group button.