DT2350 2-Channel Strain Gauge
Load Cell Data Logger Manual
ELM0099A
RST Instruments Ltd.
Page 16
T
ABLE
4-3
C
ONNECTIONS TAB OPTIONS AND DESCRIPTION
Problem
Solution
Browse
Click to change the *.csv save folder location.
Open Folder
Click to open the *.csv save folder location.
Wireless Settings
Click to select RSTAR or DT Link mode.
Wireless Loggers
Click to display list of Wireless Loggers.
▼Options
Click to access advanced features.
Logger Options
Click to enable Fahrenheit temperature units.
Advanced
Click to access advanced features. Advanced features should
be used only with the assistance of RST Instruments technical
personnel.
Default Settings
Click to revert logger settings back to default.
Admin Password
Click to change logger password.
Update Check
Click to check for software update.
Update Options
Click to adjust software update frequency and downloads folder
location.
5
T
ROUBLESHOOTING
Press F1 or click the help button to activate the help system. Answers to common
problems and troubleshooting tips may be found by browsing help topics or by
searching keywords.
T
ABLE
5-1
C
OMMON
T
ROUBLESHOOTING
P
ROBLEMS AND
S
OLUTIONS
Problem
Solution
Failed Drivers Installation
Manual installation of the USB drivers:
Start Menu > RST Instruments > DT Logger Host > Tools >
Install USB Drivers
Status Message:
Port Not Open
Close other windows applications.
Select the correct logger using logger mode buttons.
Status Message: Connecting
to the logger
Verify that the communication cable is tightly connected.
Replace logger batteries.
Reading Errors
Close and restart Multichannel DT Logger Host Software.
Transmission Error
Check the battery state on the Status tab. Drained battery may
cause data transmission errors.
Damaged USB port cover
Contact RST for a replacement cap.
Battery voltage below 3V
Contact RST for replacement batteries. Do
not
replace the
battery with an alkaline or zinc-carbon battery.
