RSL CG24 Monitor, Руководство пользователя

Страница: 29 / 48

27
INSTALLATION— Continued
Installing The RSL Speedwoofer
tm
10’s Feet
Also included with your RSL Speedwoofer are two sets of feet, one for car-
peted floors and one for hard floors. The pointed feet are designed to acoustically
couple your RSL Speedwoofer
tm
10 to a carpeted floor. The feet are to be screwed
into the threaded inserts at the bottom of your Speedwoofer enclosure. Each foot has
an adjustable height setting so you can make sure your RSL Speedwoofer
tm
10 sits
level. Select the height you want by tightening or loosing the foot from the Speed-
woofer enclosure. Once you’ve achieved the proper height setting, secure it in place
by tightening the nut included on each foot (PLEASE BE CAREFUL TO NOT OVER
TIGHTEN!). In the event that you don’t have carpet, the four non-pointed feet are to
protect hard surfaces, such as wood, tile, or marble. Please remember; that attaching
the pointed feet-spikes to your RSL Speedwoofer enclosure does not enable the RSL
Speedwoofer to be used as a weapon (in that case the spikes would need to be
sharpened first).
▼You Can Skip This Section ▼
(if yours is a home theater installation)
The Easiest Stereo Installation Section You Will Find! (in this manual)
And now for something completely different… Welcome to the stereo installa-
tion section of this manual. Below we have listed some different ways of setting up
your CG4s or CG24s along with an RSL Speedwoofer
tm
10 for stereo use. You can
quickly scan these various methods and just focus on the one that seems most ap-
propriate for your equipment. Rest assured that all three methods will give you the
kind of sound that beats silence hands down!