4
STEP
THREE
1.
ONCE THE HEADERBOARD IS BOLTING ON STRAIGHT AND SQUARE, BOLT ON THE FRONT GUSSET.
2. ONLY USE THE HARDWARE DEPICTED BELOW, WORK WITH CAUTION TO AVOID ANY UNNECESSARY
FORMS OF DAMAGE.
3. FASTEN ALL FIXING SUFFICIENTLY.
STEP
FOUR
1. INSERT THE SIDE PANEL TABS ALONG THEIR TOP EDGE INTO THE SLOTS ON THE ROOF PANEL.
2.
THE SIDE PANEL WILL HAVE TO BE INSERTED INTO THE SLOTS AT AN ANGLE TO ALLOW THE BOLTS
ON THE ROOF PANEL TO COME THROUGH THE HOLES CUT IN THE SIDE PANEL, PLEASE REFER TO THE
BELOW PICTURES. (REPEAT FOR THE OTHER SIDE)
3. ENSURE THAT BOTH SIDE PANELS ARE CORRECTLY ORIENTATED. (RED FOR THE FRONT END & BLUE
FOR REAR)
4. PLEASE LIFT WITH CAUTION TO PREVENT POSSIBLE INJURY.
5. USE M6 X 25 FLAT WASHERS & M6 NYLOC NUTS TO FASTEN THE SIDE PANELS TO THE ROOF
PANEL AS DEPICTED BELOW.
Ensure side panel is inserted at a slight angle to hook into roof rail studs
Use M6 X 25 fender washers and M6 Nyloc nuts to fasten side panels to roof panel
Only hand tighten
ENSURE HEADERBOARD IS SQUARE(90 DEGREES).
ASSEMBLY OF THE RSI SMARTDECK
M10 NYLOC NUTS.
M10 X 30 FENDER WASHERS.
M10 X 30 FENDER WASHERS.
M10 X 30 SET SCREWS WITH M10 X 30 FENDER WASHERS.
M6 X 16 BUTTON HEAD SCREWS.
GUSSETS.
M6 X 16 FENDER WASHERS.
GUSSETS.
GUSSET BOLTING PROCESS.
