ASSEMBLY OF THE RSI SMARTDECK
!
1. ONLY USE THE RECOMM
E
NDE
D
TOOLS AS INDICATED IN T
HE
FITM
ENT INSTRUCTION ON THE PAGE BEFORE
2. ONLY USE THE HARDW ARE PROVIDED IN
T
HE
ASSEMBLY KIT OUTLINED ON THE PAGE BEFORE
3. HANDLE
AL
L
RSI SMARTCANOPY COMPONENTS WITH CARE UPON UNPACKING
4. TO AVOID SCRATCHING DO NOT P
LA
C
E RSI SMARTCANOPY COMPONENTS ON A ROUGH SURFACE
5. NE
VE
R
USE ACETONE ON P AINTWORK
3
STEP
ONE
1.
REMOVE THE COMPONENTS FROM THE PACKAGING AND PLACE SOMEWHERE SAFE OUT OF HARMS WAY.
2. BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
3. INSPECT FOR ANY DAMAGE THAT MIGHT HAVE OCCURRED DURING SHIPPING., REPORT DAMAGE
IMMEDIATELY WHEN NOTICED.
WARNING: PLEASE ADHERE TO GUIDE TO PREVENT DAMAGE
TO RSI SMARTCANOPY DURING ASSEMBLY.
STEP
TWO
1.
PLACE THE DECK RIGHT WAY UP ( AS IF IT WAS BEING FITTED TO A VEHICLE).
2. BOLT ON THE HEADER BOARD USING THE HARDWARE DEPICTED IN THE IMAGES BELOW.
3. USE A SQUARE TO ENSURE THE HEABERBOARD IS BOLTED ON STRAIGHT.
4. PLEASE NOTE THERE ARE 7 MOUNTING POSITIONS.
Ensure some of the sealing tape is left loose for fitment purposes
Edges where foam seal tape needs application
Edges where foam seal tape needs application
M6 NYLOC NUT.
M6 FLAT WASHER.
RIV STUDS FROM HEADER BOARD.
PLEASE NOTE THERE ARE 7 FIXING POINTS.
