2
3
Data0
Data1
Data9
MAX Data0
MAX Data1
MAX Data9
MIN Data0
MIN Data1
MIN Data9
AVG Data0
AVG Data1
AVG Data9
Press the “MEAS” button .Point the laser spot at the object or bring the contact probe to
the object .Then read the measurement on the LCD display.
Contact and non-contact tachometer / English
Contact and non-contact tachometer / English
4. Function Description
In scan mode, the current measurement is displayed on the main display. The main display
will hold the last values until the tachometer automatically turns off.
Data Storage: Press the “MEAS” button until the reading displayed on the LCD display.
Observe the reading and press the “MEM” bottonto record. The maximum,minimum,average
and data during one shot measurement will be stored into a memory set. Then the Data
numer will increase by one.
Recall Data: Use the “MEM” botton to scroll and view the stored data point. Press the “MEM”
button once to next storage,you will view the MAX measurements, MIN measurements, AVG
measurements and DATA measurements. Press the “MEM” button and don’t to release it to
leap to next Data Set.You will view Data0 to Data9 ,10 selectable Data measurements.
Press the "MEM" button once to nex storage
Measurement Mode Switch
Press the "MEM" button and don't to release it
[ chart 1 ]
[ chart 3 ]
[ chart 2 ]
Data0
Data1
Data9
MAX Data0
MAX Data1
MAX Data9
MIN Data0
MIN Data1
MIN Data9
AVG Data0
AVG Data1
AVG Data9
Measurement Mode Switch
: Release the “MEAS” button and press the “MODE” button
before the instrument auto power off(released the “MEAS” button this instrument will auto
power off in 15 sec).There are two group of measurement. You can press the “MODE” button
once to change from RPM,rpm,HZ,….to the next sequentially. Press the “MODE” button and
hold for approx.3 sec to leap to the next group .Then you can press the “MODE” button once
to change from REV,M,In….to the next sequentially. Selected the mode of you need, depress
the “MEAS” start measures.
Press for 3 sec
RPM
REV
rpm
M
HZ
In
M/N
FT
I/M
Yd
F/M
Y/M
RPM: Non-Contact revolutions per minute measurements.
rpm: Contact revolutions per minute measurements.
HZ : Non-Contact /Contact frequency measurements.
M/M: Contact Meter per minute measurements.
I/M: Contact Inch per minute measurements.
F/M : Contact Feet per minute measurements.
Y/M: Contact Yard per minute measurements.
REV: Revolution measurements.
M : Length measurements in the uit of meter.(Using the master 10cm circumference wheel.)
In : Length measurements in the uit of inch. (Using the master 10cm circumference wheel.)
FT : Length measurements in the uit of feet. (Using the master 10cm circumference wheel.)
Yd : Length measurements in the uit of yard. (Using the master 10cm circumference wheel.)
