RS-PRD-00615-001
Page 9
2.2. System requirements
Refer to the Installation Guide and User Manual for the footscan 9 software.
2.3. General safety information
This section contains instructions regarding safety. Please read carefully.
Prior to a measurement session, instruct the client how to stand on the 3D Foot Scanner. The
client should only step or stand on the designated scan area or center of the support step.
Do not jump on the glass plate. Protect the glass plate from high impacts or sharp objects.
Do not exceed the maximum specified weight of 200 Kg (440 lbs.).
Do not use the 3D Foot Scanner if cables or parts such as the glass plate or side support step are
damaged.
Do not use a USB connection cable longer than the supplied 1.8m (71 Inches) cable, use a
powered hub or active extension cable in combination with the supplied cable if a longer
connection cable is required.
Always use the supplied USB cable for compliance to the applied standards.
Install the 3D Foot Scanner level on a solid and non-skid surface.
Power off the 3D Foot Scanner when not in use or before connecting / disconnecting cables.
When powered off, wait at least 10 seconds before powering up again.
Unplug the power cord when not in use for longer periods.
When unplugging the power or USB cable, always pull the plug, never the cable.
Protect the 3D Foot Scanner cables and connectors from accidental damage. Secure the cables
to prevent accidental tripping or entanglement. Do not bend, twist, stretch, modify or wrap the
cables.
Protect the 3D Foot Scanner from shocks and vibration. Reinstall the shipping lock when
transporting.
Do not place the 3D Foot Scanner adjacent to equipment or power lines which generate strong
electromagnetic or electrostatic fields, or in the vicinity of sensitive equipment. Relocate if
necessary.
Do not operate or store the 3D Foot Scanner outside the specified environmental temperature and
humidity range, do not expose to direct sunlight, do not expose to moisture. For indoor use only.
Replace the fuse with one of the same rating, unplug the power cord before replacing the fuse.
2.4. Laser safety
The 3D Foot Scanner uses Class 1 laser light, do not stare into the laser beam or view directly
with optical instruments. Laser light can damage your eyes.
The 3D Foot Scanner is classified per EN 60825-1:2014 as a Class 1 laser product.
The 3D Foot Scanner complies with FDA performance standards for laser products except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
