RS-PRD-00615-001
Page 14
Connect the USB-A plug side of the cable (flat
rectangular plug) to a free USB port on your PC.
Match the orientation of plug and connector.
When the hardware setup is completed, switch on the
3D Foot Scanner by switching the power switch to the
ON position (Marked I).
A self-test will be performed, after that the 3D Foot
Scanner is ready for use.
The scanner button on the top will lit green when the
scanner is ready.
6. Start the software
Refer to the Installation Guide and User Manual for the footscan 9 software.
7. Your first measurement
Once you have installed the software and set up the 3D Foot Scanner, you are ready to take your first
measurement.
Let the client step carefully onto the glass plate of the
scanner with either left or right foot, the other foot on
the support step.
