RS-PRD-00615-001
Page 17
I/O:
1x USB 2.0 (1.8m USB cable A
–B)
Supply voltage:
100 V
– 240 V AC 50-60 Hz
Power consumption:
9 W non scanning
19 W scanning
1
Mains connection:
connect to the AC mains
2
Fuse:
mains fuse, replace with same rating (1.25A)
3
Power switch:
to switch the 3D Foot Scanner on or off, lights red when power is on and
mains connected
4
Foot pedal:
to connect the optional foot pedal, can be used to start a measurement
5
USB:
connect the USB-B end of the USB cable, connect the USB-A end of the
USB cable to the PC
1
Start button /
status LED:
Touch, cover or wave over at a short distance to start a measurement (not
yet implemented in the footscan
®
software).
A green light indicates the scanner is ready, a red light indicates the
scanner is busy.
1
2
3
4
5
1
