RS-PRD-00615-001
Page 13
4. Software installation
Caution: Do not connect the 3D Foot Scanner to the USB port of the PC until the
software is installed.
Refer to the Installation Guide and User Manual for the installation of footscan 9 software.
5. Connecting the scanner
Once the software has been successfully installed, you are ready to connect the 3D Foot Scanner.
Verify if the power switch is in the OFF position
(Marked O).
Connect the power cord to the 3D Foot Scanner and
plug it into a properly grounded AC outlet.
Connect the 3D Foot Scanner to your PC using the
supplied USB cable. Connect the USB-B plug side of
the cable (square plug) to the USB connector on the
3D Foot Scanner.
Match the orientation of the plug and connector, align
the beveled edges of the plug with the beveled edges
of the connector.
