RS PRO RS-133, Инструкция по эксплуатации

Страница: 51 / 64

Documenting Multifunction Calibrator / EN
06/04/2018 Version No. 1
45
2b. Start Data Logging
(1) Under any ranges/modes except Hz range, press and
then “SHIFT”
will show on the left bottom of the display. Press button to start logging
single-point data under specified FILE NAME.
(2) Under all the ranges/modes, single-point data under the same FILE NAME can
be logged together.
(3) To continue data logging under each range, users just have to repeat the
above step 1.
3. Multi-point Data Logging
3a.
Data Logging Set Up
(1) Only under V range, users can set up SAMPLE and FILE NAME.
And the setups under V range will be applied to other ranges (mA,
…).
(2) Press to enter SETUP function.
(3) SAMPLE: set up the
“sampling time” (from 1~255 sec.).
(4) FILE NAME: for multi-point data logging, data can not be saved under
different file names. Here users do not have to set up a
“file
name
”.