8
1
2
3
4
8
9
10
11
12
13
StationMaster
Speed Adjust
and
Programming Mode
When programed to use sensors:
The top "cruising" speed of the train can be adjusted by turning the "top speed" dial.
“Full speed" is clockwise. Turn this dial down as necessary to set the desired cruising speed.
Typically, this dial is set fully clockwise and the transformer is used to set the
speed of the train.
If you have a fixed DC power supply, then use this dial to set the top speed of your trains.
Default condition for diode reverse mode:
Reduce the “creep speed” of the train into the diode stops after the deceleration has finished.
RR-Concepts.com
C
R
R
Speed Dial
Full counter-clockwise will enter Programming Mode.
When not full counter-clockwise, this dial does the following:
