2
To
Power Pack
DC TRACK
Terminals.
If StationMaster does not turn on
then reverse direction on transformer.
To
TRACK
Diode Isolators (two places)
RR-Concepts.com
C
R
R
Reversing Operations -
No Sensors, acceleration, deceleration.
The default hookup uses diodes at the ends which will stop the train when it
crosses the boundary. If desirable, LGB 10151 units can be use in place of diodes.
PROGRAMMING:
Best performance is achieved with the
factory default settings
. (See factory default
programming instructions) If desired the acceleration rate and time delays can be changed.
Reversing using Diodes
1
Diodes can be wired to the track using
self-tapping screws or attached to an isolator.
A 1 or 2 AMP diode is usually sufficient.
continued...
1
2
3
4
8
9
10
11
12
13
StationMaster
Here is the hookup:
* 2 wires from the transformer to the Reverser.
* 2 wires from the Reverser to the track.
* Diodes on the ends where the engine will stop.
